商务英语对话中英对照（精选8篇）
导读：我根据大家的需要整理了一份关于《小学英语对话中英对照》的内容，具体内容：英语对话教学中必须给学生创设一个真实的语言交际环境,为学生提供充分运用英语进行交流实践的机会,使学生能够加深理解、熟练掌握、灵活运用,达到学以致用的目的。我整理了中英对照的小学英语对话...英语对话教学中必须给学生创设一个真实的语言交际环境,为学生提供充分运用英语进行交流实践的机会,使学生能够加深理解、熟练掌握、灵活运用,达到学以致用的目的。我整理了中英对照的小学英语对话，欢迎阅读!
中英对照的小学英语对话一
Kay: Whats the name of the city where you were born,Jun? Tell me again.Jun: Puyo.Its located 200 kilometers southeast of Seoul.Kay: Do you ever get homesick?
Jun: Not really.But I miss my mothers cooking from time to time.Kay: Do your parents live in the center of Puyo?
Jun: No,I wouldnt call it the center.Kay: Is it far away?
Jun: Not so far.The place where they live is about 30 minutes by bus from downtown Puyo.Kay: I hope you dont mind me asking so many question.Jun: Actually,now that you mention it,I am kind of homesick.凯：你出生的城市叫什么名字，小君?再告诉我一遍。
小君：普约。它位于首尔东南 200 公里。
凯：你有没有想家?
小君：不完全想。但我时常想念我妈妈做的饭。
凯：你的父母住在普约市区吗?
小君：不，我不会把它叫市区。
凯：很远吗?
小君：不远。他们居住的地方到普约市区大概要乘 30 分钟的巴士。
凯：我希望你不介意我问这么多问题。
小君：其实，现在你提到它，我也有点想家了。
中英对照的小学英语对话二
Sophie: Does your mother work?
Billy: Yes,she does.Sophie: What does your mother do?
Billy: Shes a dentist.Billy: What about your mother?
Sophie: My mother is a housewife.Billy: Sounds good!I dont like working moms.Sophie: Why?
Billy: My mother is always busy.Sophie: Billy,look at this.A housewife is always busy,too.苏菲：你母亲有工作吗?
比利：是的，她有。
苏菲：你妈妈是做什么的?
比利：她是一名牙医。
比利：那你妈妈呢?
苏菲：我的母亲是一个家庭主妇。
比利：听起来不错!我不喜欢工作的妈妈。
苏菲：为什么?
比利：我的母亲总是很忙。
苏菲：比利，看看这个。一个家庭主妇也总是很忙。
中英对照的小学英语对话三
Sue: Mother,when was Weight Watchers International founded,do you know?
Mrs.Santelli: When was it founded? How would I know?
Sue: Havent you noticed its advertised every night in the paper?
Mrs.Santelli: No,actually I havent.Sue: Evidently it was organized by some local women.Mrs.Santelli: Wait a minute.Are you trying to tell me something?
Sue: Frankly,Mother,you could lose a few pounds.Mrs.Santelli: I know.Youre right.When are the classes given?
Mrs.Santelli: Do you remember?
Sue: Theres a special mothers course offered from eleven to one.Mrs.Santelli: Oh,what a shame!Thats when I eat lunch.苏：妈妈，当慧俪减肥国际公司成立，你知道吗?
桑特利太太：什么时候成立的?我怎么会知道呢?
苏：你没有注意到它每天晚的广告上吗?
桑特利太太：不，我没有。
苏：很显然，它是由一些当地妇女。
桑特利太太：等等。你是想告诉我什么?
苏：坦白地说，妈妈，你可能要减减肥了。
桑特利太太：我知道。你说得对。课程是几点的?
桑特利太太：你还记得吗?
苏：有一个特殊的妈妈课程，从十一点到下午一点。
桑特利太太：哦，太可惜了!那是我吃午饭的时候。
(求)：对不起，我叫林艾咪。我和朱约翰先生在十点钟有个约会，你介意帮我通报一声吗?
2. secretary (s) ： yes， miss lin， mr. zhu is expecting you. go right in.
秘书(秘)：是的，林小姐，朱先生正在恭候你，请进。
3.(a)： have i the pleasure of speaking to mr.john zhu?
(求)：我有这份荣幸和朱约翰先生说话吗?(请问阁下是朱先生吗?)
4.(z)： yes， i am mr.zhu.miss lin， i have read your letter of application. you don't seem to have any working experience.
(朱)：是的，我就是朱先生。林小姐，我已经看过你的 求职信 了。你似乎没有什么工作经验。
5.(a)： yes and no. yes，i just left college and i don't have any working experience. however， the rigid training at my college should make up for my lack of working experience.
(求)：可以说有也可以说没有。我才从学校毕业，还没有工作经验。但我在学校所受过的严格训练，应该可以弥补我工作经验的缺乏。
6.(z)： what do you expect for a starting salary?
(朱)：你心中理想的起薪是多少?
7.(a)： i'll leave that to you，sir. i'm sure you know what is best for me.
(求)：由阁下决定好了。我肯定您知道什么对我是最适合的。 ”
8.(z)： miss lin， are you married?
(朱)：林小姐，你结婚了吗?
9.(a)： i can't say i am.i don't even have a steady boy friend.
(求)：我不能说我结过婚。我连一个固定的男朋友都没有。
10.(z)：what are your future plans， if you don't mind my asking.
(朱)：你未来有什么计划?如果你不介意我这样问。
11.(a) ：i'm a doer，not a day dreamer.
(求)：我是一个喜欢实干的人，而不是一个做白日梦的
12.(z)：okey， miss lin，we will let you know.
(朱)：林小姐，我们会再通知你。
13.(a)：thank you，sir for giving me the time.i hope to see you again and soon.
(求)：谢谢您给我这宝贵的时间，我希望很快能再见到您。
注：1.句1中，“excuse me.”不是做错事的对不起，而是一句开场白。请人家通报你来了，不要用“please tell him i am here。”，这是比较俗气的用法，应该用“would you mind…”来代替“please…”;用“announce”代替“tell”，这是比较高雅的语句。
2.要知道对方是不是某人，不可以用“are you mr.john zhu?”，应用句3。
3. 面试 时，最重要的就是要表现你的机智和应对能力.一般的雇主一定会因为你没有工作经验而给你较少的月薪，此时就像句5，你一方面承认没有工作经验，一方面说明学校的严格训练可以弥补这项不足，藉此让对方知道你是个机智的人。
4.句6.也是雇主必问的问题，并不容易答复，若回答得多，人家不敢聘请;若回答少了又降低自己的身份，所以用本句作为答复，是令对方高兴自己又不吃亏的最好法子。
5.句9.多数雇主都会同是否结婚。“若未婚，不要单用”no“，一个字回答，应说”i can't say i am.“，比较能表现你的风趣和幽默。
6.当雇主问你未来有什么计划时，千万别说得天花乱坠，应该用句11来回答，因为大部分的雇主都喜欢实干的人。
知识使人谦虚，无知使人骄傲。
Knowledge is power——Bacon
知识就是力量。——培根
Knowledge is a treasure, but practice is the key to it
知识是宝库，而实践是开启宝库的钥匙。
Knowledge is the food of the soul——Plato
知识是心灵的食粮。——柏拉图
Knowledge, in truth, is the great sun in the firmament Life and power are scattered with all its beams——Daniel Webster
知识的确是天空中硕大无比的太阳。它的光辉撒下生命和力量。——韦伯斯特
Knowledge without practice makes but half an artist
有知识而无时间，只算半个能人。
Learning is the eye of the mind
学问是心灵的眼睛。
Learn young, learn fair
学习趁年少，而且要学好。
What is learned in the cradle is carried to the grave
孩提时代学到的东西，至死也不会忘却。
Learn from the mistakes of others and prevent your own
前人犯错，后人戒。
Learn to creep before you leap
先学爬，后学跳。(循序渐进)
there is no royal road to learning
学问之道无捷径。
Without learning, without eyes
NUMERICAL CONTROL
Numerical control(N/C)is a form of programmable automation in which the processing equipment is controlled by means of numbers, letters, and other symbols, The numbers, letters, and symbols are coded in an appropriate format to define a program of instructions for a particular work part or job.When the job changes, the program of instructions is changed.The capability to change the program is what makes N/C suitable for low-and medium-volume production.It is much easier to write programs than to make major alterations of the processing equipment.There are two basic types of numerically controlled machine tools：point—to—point and continuous—path(also called contouring).Point—to—point machines use unsynchronized motors, with the result that the position of the machining head Can be assured only upon completion of a movement, or while only one motor is running.Machines of this type are principally used for straight—line cuts or for drilling or boring.The N/C system consists of the following components：data input, the tape reader with the control unit, feedback devices, and the metal—cutting machine tool or other type of N/C equipment.Data input, also called “man—to—control link”, may be provided to the machine tool manually, or entirely by automatic means.Manual methods when used as the sole source of input data are restricted to a relatively small number of inputs.Examples of manually operated devices are keyboard dials, pushbuttons, switches, or thumbwheel selectors.These are located on a console near the machine.Dials ale analog devices usually connected to a syn-chro-type resolver or potentiometer.In most cases, pushbuttons, switches, and other similar types of selectors are digital input devices.Manual input requires that the operator set the controls for each operation.It is a slow and tedious process and is seldom justified except in elementary machining applications or in special cases.In practically all cases, information is automatically supplied to the control unit and the machine tool by cards, punched tapes, or by magnetic tape.Eight—channel punched paper tape is the most commonly used form of data input for conventional N/C systems.The coded instructions on the tape consist of sections of punched holes called blocks.Each block represents a machine function, a machining operation, or a combination of the two.The entire N/C program on a tape is made up of an accumulation of these successive data blocks.Programs resulting in long tapes all wound on reels like motion-picture film.Programs on relatively short tapes may be continuously repeated by joining the two ends of the tape to form a loop.Once installed, the tape is used again and again without further handling.In this case, the operator simply loads and1
unloads the parts.Punched tapes ale prepared on type writers with special tape—punching attachments or in tape punching units connected directly to a computer system.Tape production is rarely error-free.Errors may be initially caused by the part programmer, in card punching or compilation, or as a result of physical damage to the tape during handling, etc.Several trial runs are often necessary to remove all errors and produce an acceptable working tape.While the data on the tape is fed automatically, the actual programming steps ale done manually.Before the coded tape may be prepared, the programmer, often working with a planner or a process engineer, must select the appropriate N/C machine tool, determine the kind of material to be machined, calculate the speeds and feeds, and decide upon the type of tooling needed.The dimensions on the part print are closely examined to determine a suitable zero reference point from which to start the program.A program manuscript is then written which gives coded numerical instructions describing the sequence of operations that the machine tool is required to follow to cut the part to the drawing specifications.The control unit receives and stores all coded data until a complete block of information has been accumulated.It then interprets the coded instruction and directs the machine tool through the required motions.The function of the control unit may be better understood by comparing it to the action of a dial telephone, where, as each digit is dialed, it is stored.When the entire number has been dialed, the equipment becomes activated and the call is completed.Silicon photo diodes, located in the tape reader head on the control unit, detect light as it passes through the holes in the moving tape.The light beams are converted to electrical energy, which is amplified to further strengthen the signal.The signals are then sent to registers in the control unit, where actuation signals are relayed to the machine tool drives.Some photoelectric devices are capable of reading at rates up to 1000 characters per second.High reading rates are necessary to maintain continuous machine—tool motion；otherwise dwell marks may be generated by the cutter on the part during contouring operations.The reading device must be capable of reading data blocks at a rate faster than the control system can process the data.A feedback device is a safeguard used on some N/C installations to constantly compensate for errors between the commanded position and the actual location of the moving slides of the machine tool.An N/C machine equipped with this kind of a direct feedback checking device has what is known as a closed-loop system.Positioning control is accomplished by a sensor which, during the actual operation, records the position of the slides and relays this information back to the control unit.Signals thus received ale compared to input signals on the tape, and any discrepancy between them is automatically rectified.In an alternative system, called an open—loop system, the machine is positioned solely by stepping motor drives in response to commands by a controllers.There is one basic type of NC motions.Point-to-point or Positional Control In point-to-point control the machine tool elements(tools, table, etc.)are moved to programmed locations and the machining operations performed
after the motions are completed.The path or speed of movement between locations is unimportant;only the coordinates of the end points of the motions are accurately controlled.This type of control is suitable for drill presses and some boring machines, where drilling, tapping, or boring operations must be performed at various locations on the work piece.Straight-Line or Linear Control Straight-Line control systems are able to move the cutting tool parallel to one of the major axes of the machine tool at a controlled rate suitable for machining.It is normally only possible to move in one direction at a time, so angular cuts on the work piece are not possible, consequently, for milling machines, only rectangular configurations can be machined or for lathes only surfaces parallel or perpendicular to the spindle axis can be machined.This type of controlled motion is often referred to as linear control or a half-axis of control.Machines with this form of control are also capable of point-to-point control.The original N/C used the closed—loop system.Of the two systems, closed and open loop, closed loop is more accurate and, as a consequence, is generally more expensive.Initially, open—loop systems were used almost entirely for light-duty applications because of inherent power limitations previously associated with conventional electric stepping motors.Recent advances in the development of electro hydraulic stepping motors have led to increasingly heavier machine load applications.中文译文
数控技术
数控是可编程自动化技术的一种形式,通过数字、字母和其他符号来控制加工设备。数字、字母和符号用适当的格式编码为一个特定工件定义指令程序。当工件改变时,指令程序就改变。这种改变程序的能力使数控适合于中、小批量生产,写一段新程序远比对加工设备做大的改动容易得多。
数控机床有两种基本形式：点位控制和连续控制(也称为轮廓控制)。点位控制机床采用异步电动机,因此,主轴的定位只能通过完成一个运动或一个电动机的转动来实现。这种机床主要用于直线切削或钻孔、镗孔等场合。
数控系统由下列组件组成：数据输入装置,带控制单元的磁带阅读机,反馈装置和切削机床或其他形式的数控设备。
数据输人装置,也称“人机联系装置”,可用人工或全自动方法向机床提供数据。人工方法作为输人数据唯一方法时,只限于少量输入。人工输入装置有键盘,拨号盘,按钮,开关或拨轮选择开关,这些都位于机床附近的一个控制台上。拨号盘通常连到一个同步解析器或电位计的模拟装置上。在大多数情况下,按钮、开关和其他类似的旋钮是数据输入元件。人工输入需要操作者控制每个操作,这是一个既慢又单调的过程,除了简单加工场合或特殊情况,已很少使用。
几乎所有情况下,信息都是通过卡片、穿孔纸带或磁带自动提供给控制单元。在传统的数控系统中,八信道穿孔纸带是最常用的数据输入形式,纸带上的编码指令由一系列称为程序块的穿孔组成。每一个程序块代表一种加工功能、一种操作或两者的组合。纸带上的整个数控程序由这些连续数据单元连接而成。带有程序的长带子像电影胶片一样绕在盘子上,相对较短的带子上的程序可通过将纸带两端连接形成一个循环而连续不断地重复使用。带子一旦安装好,就可反复使用而无需进一步处理。此时,操作者只是简单地上、下工件。穿孔纸带是在带有特制穿孔附件的打字机或直接连到计算机上的纸带穿孔装置上做成的。纸带制造很少不出错,错误可能由编程、卡片穿孔或编码、纸带穿孔时的物理损害等形成。通常,必须要试走几次来排除错误,才能得到一个可用的工作纸带。
虽然纸带上的数据是自动进给的,但实际编程却是手工完成的,在编码纸带做好前,编程者经常要和一个计划人员或工艺工程师一起工作,选择合适的数控机床,决定加工材料,计算切削速度和进给速度,决定所需刀具类型,仔细阅读零件图上尺寸,定下合适的程序开始的零参考点,然后写出程序清单,其上记载有描述加工顺序的编码数控指令,机床按顺序加工工件到图样要求。
控制单元接受和储存编码数据,直至形成一个完整的信息程序块,然后解释数控指令,并引导机床得到所需运动。
为更好理解控制单元的作用,可将它与拨号电话进行比较,即每拨一个数字,就储存一个,当整个数字拨好后,电话就被激活,也就完成了呼叫。
装在控制单元里的纸带阅读机,通过其内的硅光二极管,检测到穿过移动纸带上的孔漏
过的光线,将光束转变成电能,并通过放大来进一步加强信号,然后将信号送到控制单元里的寄存器,由它将动作信号传到机床驱动装置。
有些光电装置能以高达每秒1000个字节的速度阅读,这对保持机床连续动作是必须的,否则,在轮廓加工时,刀具可能在工件上产生划痕。阅读装置必须要能以比控制系统处理数据更快的速度来阅读数据程序块。
反馈装置是用在一些数控设备上的安全装置,它可连续补偿控制位置与机床运动滑台的实际位置之间的误差。装有这种直接反馈检查装置的数控机床有一个闭环系统装置。位置控制通过传感器实现,在实际工作时,记录下滑台的位置,并将这些信息送回控制单元。接受到的信号与纸带输入的信号相比较,它们之间的任何偏差都可得到纠正。
在另一个称为开环的系统中,机床仅由响应控制器命令的步进电动机驱动定位,工件的精度几乎完全取决于丝杠的精度和机床结构的刚度。有几个理由可以说明步进电机是一个自动化申请的非常有用的驱动装置。对于一件事物,它被不连续直流电压脉冲驱使,是来自数传计算机和其他的自动化的非常方便的输出控制系统。当多数是索引或其他的自动化申请所必备者的时候,步进电机对运行一个精确的有角进步也是理想的。因为控制系统不需要监听就提供特定的输出指令而且期待系统适当地反应的公开-环操作造成一个回应环,步进电机是理想的。一些工业的机械手使用高抬腿运步的马乘汽车驾驶员,而且步进电机是有用的在数字受约束的工作母机中。这些申请的大部分是公开-环 ,但是雇用回应环检测受到驱策的成份位置是可能的。环的一个分析者把真实的位置与需要的位置作比较,而且不同是考虑过的错误。那然后驾驶员能发行对步进电机的电脉冲,直到错误被减少对准零位。在这个系统中,没有信息反馈到控制单元的自矫正过程。出现误动作时,控制单元继续发出电脉冲。比如,一台数控铣床的工作台突然过载,阻力矩超过电机转矩时,将没有响应信号送回到控制器。因为,步进电机对载荷变化不敏感,所以许多数控系统设计允许电机停转。然而,尽管有可能损坏机床结构或机械传动系统,也有使用带有特高转矩步进电机的其他系统,此时,电动机有足够能力来应付系统中任何偶然事故。
I have a good friend. She is a pretty girl. She lives in Jiujiang. She is a middle school student. She has big eyes, a small mouth, a small nose and a round face. She is tall and thin. She likes watching TV and playing the basketball. On the weekend, she always plays basketball with her friends in the afternoon and watches TV in the evening.
She is a good student. She is good at English. She likes speaking in English. She always reports news in English in her school.
She says we are good friends. We often send e-mails to each other everyday. I like her very much.
【参考译文】
我有一个好朋友。她是一个漂亮的女孩。她住在九江。她是一所中学的学生。她有大眼睛,小嘴巴,一个小鼻子和一张圆圆的脸。她又高又瘦。她喜欢看电视和打篮球。在周末,她经常和她的朋友们打篮球在下午和晚上看电视。
她是一个好学生。她擅长英语，她喜欢说英语。她在学校总是在英语新闻报道。
花样滑冰 Figure Skating
附加动作 additional move
花样滑冰鞋 figure skate
特种圆形 advanced figure
半周、半圆 half-circle
燕式旋转 arabesque spin
冰上表演 ice show
艺术印象 artistic impression
冰场 ice arena
自由滑 art skating
滑区 skating area
平分 assign marks
一周半跳 axel-paulsen
旋转轴 axle of revolution
倒滑压步 back cross over
后内刃 back in
后内括弧形 back in bracket
后内变刃形 back in change
后内圆形 back in circle
后内外勾形 back in counter
后内结环形 back in loop
后内单脚结环形 back in loop change loop
后内内勾形 back in rocker
后内环绕，后内螺旋形 back in spiral
后内直立旋转，单脚直立旋转 back in stand spin
后辅刃 back out
后内括弧形 back out bracket
后外变刃形 back out change
后外圆形 back out circle
后外勾形 back out counter
后外结环形 back out loop
后外环绕，后外螺旋形 back out spiral
倒滑，退滑 back skating
Hello!Everyone, I’m Ma Yun.The virgo who change the world.Today is September 19th.This evening Alibaba wlii land the New York stock exchange after the delisting.We’ve got the integration of listed for $68 per share total $218 billion.what a sign of that? We are the third global financing scale.Dear,$1748 billion.How much time we need to spend that money ?
I know,maybe you are very worship me.But in more than ten years ago.People always say I am a liar.What I want to make yellow pages for the State Sports Commission.They ignores me and said “you should make an appointment” Appointment your sisiter!Thanks for a TV photographer recorded that for me.Now think about it, I’ll say “today you ignore me
tomorrow I’ll shut you out.”
When I was in trouble I went to USA and eager finance 2 million dollars.However,I was rejected by 300 VC.That day, I felt I’m really a short poor ugly guy.But today what I want is 2 hurndred billion.As a result, the participants of the investors lined upon the same floor where I live in the 90th floor like thousands of people waiting for ipone 6 in front of an Apple store.Behind my valiant record there is also a time when I make a mistake.That was Yahoo!Only spent 10 billion bought our 40% shares.Bartz later refused to cooperate wihe me.I really want marry her and dumped her.So our equity situation is 34.4% share hold by Softbank.22.6% share hold by Yahoo.As chairman of board.I only hold 8.9%.LuZhaoxi holds 1%.Others hold 29.6% share.Bright spot is the other, I really don’t want to say anymore.I kow after tonight Alibaba must be looked as a giant company by foreigners.But who knows the “Alibaba” trademark was not in our hands before.Thanks to the party and the country that we win the lawsuit or now “Alibaba” really become a sesame oil brand.As this roadshow process.I repeated the ecological energy of Aligroup.Now we have a very awesome Alipay, Taobao, Tmall business group and those about to enter the KTV, the pharmacy and usury industry.The next step, we will bet on logistics and intelligent hardware field.Last year we set up food logistics.This year we will enter the domestic mobile phone industry.When ZTE-Huawei-Coopad-Lenovo Association is dying.I think that Meizu, oppo still have sense of B.Even laoluo and letv start to do smart phone.What else can I do? So Alibaba is going to buy Meizu immediately and become a next grains.There’s an old saying in china the rich won’t last 3 generations.Our vision is to make the Alibaba to become a sustainable development enterprise.Which will last for 3 generation.I believe that afer the next time Alibaba delisting listed again.We can achieve a trillion enterprise.Finally ,I decided to give each of your Alipay account with 919 RMB to commemorate the listed, thank you.Translation 大家好，我是马云，改变世界的处女座。今天是9月19日，今天晚上阿里巴巴在退市之后将在纽交所上市交易。我们整合上市每股￥68美元，总额为$218亿。这代表什么？我们的融资规模是全球第三大的。亲爱的，1748亿，这些钱我们要花多久啊？
我知道，也许你很崇拜我。但是十年之前人们经常会说我是个骗子。当我想为国家体育总局制作黄页时，他们对我不理睬，他们说“你必须先预约”约你妹啊！感谢电视摄影师为我记录下这个场景。现在我想说今天你对我爱答不理，明天我让你高攀不起。当我处于困境，我去美国融资2百万美金，然而被300位风投拒绝。那时，我真的觉得自己是一个矮、穷、丑的人。但是今天我要的是200亿。结果投资者在我住的酒店90楼排起长队，就像上千人在苹果专卖店门前等IPHONE6.在我英雄记录的背后也犯过一些错误.那就是雅虎只花了10亿就买下了我们40%的股权。之后贝茨拒绝跟我合作。我真想先娶了她然后再甩了她。我们现在的股权情况是软银掌握34.4%的股权，雅虎掌握22.6%，作为懂事局主席我只掌握8.9%，陆兆禧掌握1%，其他人掌握29.6%，两点是其他。
我真的不知道再说些什么，我知道今晚过后阿里巴巴将被外国人看做是一家大公司。但是没人知道“阿里巴巴”的商标以前不是我们的。感谢党和国家帮我们打赢官司，否则今天“阿里巴巴”将成为香油的品牌。
As a little princess, she didnt hate nobody even her teacher a terrible miss.
At the moment, I just want to say that something you should insist,a good sentence,All road lead to the Rome,and Everything is possible, she can be a severnt from a princess,but after she insist,so she become a princess again,
I like the girl-Alice。
多么勇敢善良的女孩啊!她是一个富有家庭的公主，她的父亲以前真的很爱爱丽丝，然而，有一次她父亲在事故中出了什么错，所以老师对爱丽丝很残忍，但我发现爱丽丝非常勇敢和外向，她从来没有说过什么害怕或不好的话，她只是继续成长，很快，一个笑话是爱丽丝得到了她父亲的一个朋友，这样她就能过上好生活，重新开始幸福的生活，是的，爱丽丝是个好公主，
作为一个小公主，她不恨任何人，甚至连她的老师都不恨——一个可怕的小姐。
此刻，我只想说一句你应该坚持的话，一句好话，一条通往罗马的路，一切皆有可能，她可以成为公主的断绝者，但在她坚持之后，她又成为了公主，
【商务英语对话中英对照】推荐阅读：
新概念英语中英对照06-12
学生英语演讲稿中英对照10-17
英语演讲稿（中英文对照）06-11
疯狂英语对话10-18
英语电影台词对话05-25
六年级英语对话07-12
谈论工作英语对话10-11
英语情景对话共11-28
英语面试问题经典对话07-14
英语电影台词经典对话10-07
